Page 17
DANGER:
Before replacing the
oven lamp, ensure that the
appliance is disconnected from
mains and cooled down to avoid
the risk of an electrical shock. Hot
surfaces may cause burns!
The oven lamp is a special
electric light bulb that can resist
up to 300°C. See Technical
specifications for details. Oven
lamps can be obtained from
Authorised Service Agents.
Position of lamp might vary from
the figure.
Replacing the oven light bulb
To replace a faulty light bulb, proceed as
follows:
1.
Disconnect the product from mains.
2.
Turn the glass cover counter clockwise
to remove it.
3.
Remove the oven lamp by turning it
counter clockwise and replace it with
the new one.
4.
Install the glass cover.
Oven light
The oven light is switched on by the
function selector
switch and switches off
when the knob is returned to
0
.
Removing the oven door
Steps carried out during the
removal process should be
carried out in reverse order to
install the door. Do not forget to
close the clips at the hinge
housing when reinstalling the
door.
Lift-off oven door
The oven door may be removed to improve
oven access during cleaning.
Removing the oven door
1. Open the front door (1).
2. Open the clips at the hinge housing (2) on
the right and left hand sides of the front
door by lifting them up. Hold the door on
both sides and then close the door and lift
the door up to remove it. Refitting is the
reversal of removing.
1
Front door
2
Hinge
3
Oven
