Definitive Technology Symphony 1, Руководство по установке

Страница: 8 / 41

7
Active Noise Cancellation (ANC)
The Active Noise Cancellation feature can be turned on or off at any time
by simply pressing the ANC toggle button. A short beep can also be
heard to signal this activity.
ANC LED Description
Solid ANC is active
Off ANC is off
Listeners will also enjoy the fact that you can keep ANC mode enabled even without a music source playing.
This is designed for periods when you want to simply silence your surroundings (ex. airplane). Note, however
that the headphones will automatically turn off to conserve battery life when ANC is active AND there is 3 hours
of inactivity ( no music p no button presses ).
Symphony 1 Battery Life
With 100% charge, the Symphony 1’s battery will last up to 10 hours when powered on with ANC enabled
and at full volume, and up to 15 hours with ANC disabled and at full volume.
Charging your headphones
Use the Micro USB cable to charge the headphone’s lithium-ion battery.
Headphones LED status
Headphones are ON and charging Power LED will remain solid.
Headphones are OFF and charging Power LED will pulse until fully
charged, then turn off
Power On & Off
To toggle Power On or Off, simply press and release the power button.
Power LED Description
Solid Headphones on. OR
Headphones on & charging.
Pulsing Headphones off, but charging
Flashing Slowly Battery life at 20% or less; ( A one-note tone confirms )
Flashing Rapidly Battery life at 5% or less; (
A two-note tone confirms
)
Bluetooth
Bluetooth will always default to ON at power up and will look to connect
to the last paired Bluetooth device, except when first powered-on
out of the box in which it will enter discovery mode until a connection
has been made.
To manually toggle Bluetooth connectivity On or Off, press and release the
Bluetooth button on your headphones
Important note: Bluetooth is disabled when
the headphones are in AUX listening mode (auxiliary cable is plugged into Symphony 1).
When pairing a new device to Symphony 1, you must put the Symphony 1
into Bluetooth discovery mode. Follow these steps to enter discovery mode:
1) Power on Bluetooth .
2) Press and hold the Bluetooth button on your headphones for 1 second
until the Bluetooth LED begins to pulse slowly. You are now in
discovery mode.
3) The Symphony 1 will search for a connection for up to 90 seconds.
If no connection is found, Bluetooth will automatically turn off.
Bluetooth LED Description
Pulsing In Bluetooth discovery
mode
Solid Bluetooth connected
Flashing Searching for
previously connected
device