ZEN-LOG-MAN-16V03 (0930)
Copyright © 2016 Define Instruments
11
4
SOFTWARE CONFIGURATION
4.1 - Connecting
Connect the Bridge Key
To program your Zen Datalogger, con-
nect one end of the
Interface Cable
to
the programming port on the left side
of the Zen (see Fig 4), and the other
end to your
Bridge Key
.
Then plug the
Bridge Key
into your
computer's USB port (see Fig 5).
Supply Power
Supply power to the Zen Datalogger,
referring to 6.1 for wiring.
Fig 4
Bridge Key
Interface Cable
PC Connection
INSTALL
SOFTWARE FIRST!
Zen Datalogger
Power Supply
Fig 5
Connect to your Zen in Define WorkBench
Launch Define WorkBench (see Section 3 for installation instructions), and select the 'Prog
Port' tab. If your Zen is powered up and connected via the Bridge Key, then the COM Port will
be detected automatically. Click 'Connect'.
