11
4
APPENDIX
A
INPUT & OUTPUT PROGRAMMING ERRORS
If you close the application or click the Disconnect
button when there are unwritten changes
, the
following dialogue will be displayed.
If you click
Yes
, the soft ware will program the changes
and then close. If you click
No
, the soft ware will close
without writing the new changes to the transmitter.
If an error occurs
during program-
ming,
the following
dialogue will appear
and the soft ware will
terminate connection
to the transmitter. Connect the transmitter to the
computer again, ensuring that all cables and adaptors
are fully pushed in. Then click
Connect
and repeat the
programming procedure.
B
INPUT ZERO ADJUST - VERSION COMPATIBILITY
This feature requires
transmitter fi rmware
V 1.20 or later
, as
shown in the
Model
Details
panel.
If the transmitter does not have the correct fi rmware
installed, input zero adjustment will not be available
and the following will be shown.
There is no transmitter fi rmware upgrade available.
To
use this feature, you must replace the transmitter.
11