NIM2-MAN-19V01 (1104)
Copyright © 2019 Define Instruments
12
6
SOFTWARE CONFIGURATION
6.1 - Connecting
Connect the Bridge Key
To program your Nimbus IoT, connect one
end of the
Interface Cable
to the 'PC Setup'
port on the unit's front panel, and the
other end to your
Bridge Key
.
Then plug the
Bridge Key
into your com-
puter's USB port (see Fig 5).
Supply Power
Supply power to the Nimbus IoT, referring to
7.1 for wiring.
Connect to your Nimbus IoT
in Define WorkBench
Launch Define WorkBench (see Section 5
for installation instructions), and select the
'Prog Port' tab.
If your Nimbus IoT is powered up and con-
nected via the Bridge Key, then the COM
Port will be detected automatically. Click
'Connect'.
Fig 5
