10
Troubleshooting
Problem
Possible Cause
Solution
The light will not come on.
□
Daylight turn-off (photocell) is in effect.
□
The motion sensor is out of coverage
area.
□
Batteries are dead.
□
Batteries may be incorrectly installed
□
Set the DUSK LEARN at
desired lux level.
□
Reposition the unit within
your desired detecting range.
□
Recheck with new batteries.
□
Recheck and make sure
batteries are installed
with the correct polarity
(+ & -), as shown in the
battery compartment.
The light comes on during
the day.
□
The motion sensor may be installed in a
relatively dark location.
□
DUSK LEARN was set in daylight
conditions.
□
The light fixture is operating
normally under these
circumstances.
□
Reset the DUSK LEARN
setting by pushing once at
the desired level of darkness,
or return to the factory
setting by pushing the DUSK
LEARN button twice within 2
seconds.
The light comes on for no
apparent reason.
□
The motion sensor may be sensing
small animals or automobile traffic, or
other heat sources.
□
Strong wind may activate the sensor.
□
Re-aim the motion sensor.
□
The light fixture is operating
normally under these
circumstances.
The lights stay on
continuously.
□
Another regular light is positioned too
close to the motion sensor or pointed
at nearby objects that cause heat to
trigger the motion sensor.
□
The motion sensor may be picking up
a heat source like an air vent, dryer
vent, or brightly painted, heat-reflective
surface.
□
Reposition the motion sensor
away from the light or nearby
objects.
□
Same as above.
IQA HD-LB1895-IM-US-20180507B-FINAL.indd 10
28-May-18 9:18:24 AM
