Defiant DF-SK8, Руководство пользователя

Страница: 15 / 88

5
CYCLING OPERATION
Battery and charger
Each E-scooter is equipped with unique
lithium battery and charger, do not use
other sort charger, other sort charger
can’t charge for the battery.
Lithium battery (ternary lithium battery)
Battery can be charged at any time,
ensure the battery power is full at any
time, that is harmless for the battery;
please charge once less than one
month, if keep it too long to be charged,
please contact the dealer to starting
batteries again.
The charger
Chargers have overcharge protection
function, when the batteries charged
100%, automatically stop charging.
Charging instructions
1. Connect the charger cable to E-
SCOOTER charging socket.
2. Connect another charger cable to the
normal power supply socket (AC100-
240V).
3. Feed the charger power, charger indi-
cator light is red, said is charging, the
indicator light is green, said the battery
is full (it is best state to keep the green
light is on for two hours).
E-SCOOTER QUICK MAINTENANCE
E-SCOOTER was assembled by profes-
sional people. Any attempt to inde-
pendently fix or change
E-SCOOTER any parts, will cause dam-
age to E-Scooter, and will cancel the
manufacturer warranty given upon de-
livery.
Required Tools
E-SCOOTER REAR FLAT TIRE RE-
PAIR
1. Make sure the E-SCOOTER is un-
plugged and powered off.
2. Place E-SCOOTER on a high stable
surface only on it’s body, so that rear
and front wheels will be in the air
3. Use 3 mm Allen key to open both
rear plastic covers.
4. From E-SCOOTER right side gently
disconnect all mot0f connectors at-
tached to wires.
5. Use wrench to disassemble motor
nuts and motors.
6. Remember the exact order and place
of washers on each side of the motor.
7. Use professional spoon (not plastic or
small ones) to dismount tire from mo-
tor, be careful not to damage the motor,
rim, tire and tube, use liquid soap
around the rim to tire slide out of the
rim.
8. With tire repair glue leakage parts
9. Put the tire back in place. Use liquid
soap around the rim to put the tire back
in place. Do not use any tools for plac-
ing back tire on the rim, use hands only.
10.Check that your repair is completely
done by pumping air to 45 psi. Into the
wheel
11.In order to put E-SCOOTER back
together do all the steps in reverse or-
der.
NOTICE
MAKE SURE THE E-SCOOTER IS UN-
PLUGGED AND POWERED OFF
OPERATION
The displayed value of battery
speed are dynamic according to
the E-scooters running, time, single
mileage, accumulation mileage and
charging times are depended your
choosing function.
Long press the button for 3 sec-
onds, display system work, LCD light
and enter ready mode.
Short press the button E-
skateboards shows present gear posi-
tion and L1, L2 or L3 light is flashing,