PX301
To plug monitor in:
1. Make sure that the monitor is set up no more then
100ft from the camera. This is to ensure a strong
signal between the camera and monitor.
2. Plug the monitor’s power adapter (marked for
monitor) into the monitor’s power input area
(marked “9V DC”).
3. Plug the other end of the power adapter into a power
source (surge protected power source recommended).
4. Press the power button to turn the monitor on to view
and hear the camera.
PLUGGING IN MONITOR
Once the monitor is connected to a power source , turn it on using the power button and it will automatically pair
with the camera. If the camera and monitor do not automatically pair please see “PAIRING” Pg 14.
Plug into Surge Protected power source
To plug the 7" LCD Monitor into another Monitor:
1. Plug single end of the A/V cable into A/V out area on back of monitor.
2. Plug the video jack (yellow) into the video input on your monitor and the audio jack (white) into the audio
input on your monitor, then press the A/V button on the 7" LCD monitor
3. You may have to adjust the channels or video source input on your monitor to view the footage.
4. Once the proper channel is set, the footage from the camera will display on the monitor.
CONNECTING TO ANOTHER MONITOR
The PX301 comes equipped with an audio/video cable that can be plugged into any monitor with an audio/video
input. Once plugged in, you will be able to watch and hear live video, access and view the menu as well as watch
playback footage from the monitor you have plugged into.
Plug adapter into 9VDC
Plug A/V cable into A/V out on monitor
Plug A/V cord into monitor
12
INSTALLATION
