W
W
W
W
WANDS
ANDS
ANDS
ANDS
ANDS
1.
(W-540) Top Wand
•
Connects to lower wand when operating the powerbrush
•
Cord management--keeps cords out of the way and allows you to
disengage the hose handle from the electric brush
2.
(BW-240) Lower Wand
•
To be used with top wand when operating the powerbrush
3.
(W-419H) Telescopic Ratchet Wand
•
Extension wand--can be adjusted to necessary height to lessen back
strain and can be extended to reach high areas
•
Extends from 23-1/2” to 39” in 3/4” increments
•
Hole in the top, friction fit on the bottom
Attaching tools or hose handle to
the wand:
The straight, outer wand is designed
to fit into your hose handle. Insert the wand
into the handle. The notched inner wand is
designed to fit into your cleaning tools. A 1/4
turn ensures a good fit. To remove the wand,
give a 1/4 turn in the opposite direction and
pull the cleaning tool or handle from the wand
.
1
2
3
TELESCOPIC RATCHET WAND OPERATING INSTRUCTIONS
To extend wand:
Push the black button in the direction of the
arrow and hold in place. This releases the ratchet and allows the inner
wand to be extended. The wand can be locked into the desired length by
releasing the button at any of the notches. To retract the wand, hold down
on the black button and push the wand back into the outer wand.
Do NOT remove wands while power is on.
1 0
IMPORTANT:
5
LIGHT BULB CHANGING
LIGHT BULB CHANGING
LIGHT BULB CHANGING
LIGHT BULB CHANGING
LIGHT BULB CHANGING
Electric Brush:
Electric Brush:
Electric Brush:
Electric Brush:
Electric Brush:
2. Push in and turn bulb counterclockwise, then pull
out to remove.
BEL
BEL
BEL
BEL
BELT CHANGING
T CHANGING
T CHANGING
T CHANGING
T CHANGING AND
AND
AND
AND
AND A
A
A
A
AGIT
GIT
GIT
GIT
GITA
A
A
A
AT
T
T
T
TOR
OR
OR
OR
OR CLEANING
CLEANING
CLEANING
CLEANING
CLEANING
Electric Brush Model:
Electric Brush Model:
Electric Brush Model:
Electric Brush Model:
Electric Brush Model:
Electric Shock or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning
the unit. Failure to do so could result in electrical shock or
personal injury from cleaner suddenly starting.
1. Remove the electric brush cover as shown in BELT
CHANGING & AGITATOR CLEANING section.
3. Push in and turn the bulb clockwise to replace. Bulb must
not be higher than 130 volts/15 watts.
Note:
Note:
Note:
Note:
Note: replacement bulb number is EB26028.
4. Reinstall the electric brush cover as shown in BELT
CHANGING & AGITATOR CLEANING section
Disconnect hose and brush from electrical outlet.
Disconnect hose and brush from electrical outlet.
Disconnect hose and brush from electrical outlet.
Disconnect hose and brush from electrical outlet.
Disconnect hose and brush from electrical outlet. Frequently check and
remove hair, string and lint buildup in brush area. If buildup becomes excessive,
disconnect the brush from wand and follow steps below.
T
T
T
T
To R
o R
o R
o R
o Remo
emo
emo
emo
emovvvvve Belt:
e Belt:
e Belt:
e Belt:
e Belt:
1. Turn the electric brush upside down.
2. Unscrew the brush cover screws.
Electric Br
Electric Br
Electric Br
Electric Br
Electric Brush Car
ush Car
ush Car
ush Car
ush Careeeee
3. Turn brush over right side up. Press handle
release pedal and lower the swivel. To remove
cover, grasp the sides and pull out to release the
outside cover.
!
WARNING
Always follow all
safety precautions
when cleaning and
servicing the electric
brush.
(Some kits may come with different wands, but instructions & info remain the same.)
