- 9 -
Mounting hole is closed when
switch is in initial position
To activate CO Alarm, slide the
alarm down onto mounting plate, or
slide to STOP.
Lift up Stop and slide to left to
permanently deactivate CO Alarm when
END-OF-LIFE signals are initiated
(C) Activation switch is not initially in ON position
Mounting hole is open when
switch is in ON position
To activate CO Alarm, slide the
alarm down onto mounting plate, or
slide to STOP.
Lift up Stop and slide to left to
permanently deactivate CO Alarm when
END-OF-LIFE signals are initiated
(D) Alarm is activated when switch is in ON position
If the activation switch is not set to ON position, as in diagram (D), the mounting hole at
top of alarm will be blocked, and the CO alarm will not be activated.
The models CA6100 and CA6150 are a sealed lithium battery powered wall mounted
alarm. Two lithium battery cells are permanently sealed with soldered connections, and
cannot be removed. No battery replacement is required, and the factory sealed
batteries will power the alarm for ten years under normal operation.
