Defender 3.0 Voice Plus, Руководство пользователя

Страница: 14 / 17

13
Monitor • Control • Surveillance
20
Monitor • Control • Surveillance
Zone 1 - Enable personal respor ng
Zone 2 - Enable CMS respor ng
Zone 1 - Keypad buzzer on during entry delay
Zone 2 - Keypad buzzer on during exit delay
Zone 4 - DTMF dialing
Zone 5 - Arm using H or A
Zone 6 - Panic bu on P
Zone 7 - Remote control
Zone 8 - Bell squawk
Enable personal respor Ɵ ng
On - The panel will report the event to the user
O
ff - The panel will not report the event to the user
Enable CMS respor Ɵ ng
On - The panel will communicate with the CMS centre
O
ff - The panel will not communicate with the CMS centre
Enable Fix line
On - The panel will communicate with mobile phone
O
ff - The panel will not communicate with mobile phone
Enable ba Ʃ ery low warning on keypad
On - The keypad will generate tone when the ba ery low
O
ff - The keypad will not generate tone when the ba ery low
Keypad buzzer on during entry delay
On - The keypad will produce the entry tones
O ff - Entry tones will not produce
Keypad buzzer on during exit delay
On - The keypad will produce the exit tone
O ff - Exit tone will not produce
DTMF dialing
On - The panel will dial using DTMF format
O ff - The panel will dial using older pulse format
Arm using H or A
On - Enable arm using H or A key
O ff - Disable arm using H or A key
Bu Ʃ on P
On - Enable using bu on P for panic bu on
O ff - Disable using panic bu on
Remote Control
On - The panel will Enable remote control
O ff - Disable remote control
Bell Squawk
On - The panel siren will pulsed once_when the
system is arm, pulsed twice when the system is
disarm
O ff - The siren will behaves normally on arm and
disarm
Zone 4 - Enable Fix line
Zone 8 - Enable ba ery low warning on keypad
Communicator
Se ƫ ng
Address Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8
31
System
Op
Ɵ on
Address Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8
33
Technical Data
g. Refer to fi gure 4.0
• Status – to show the status for each zone in condi on Arm, Trigger, Ready, Open and Bypass.
• Last Trigger – to show which zone was triggered a er disarm.
• Camera Link – IP camera link for each zone
• Bypass - to set or clear the zone bypass
Figure 4.0 Home alarm panel status
ZONE STATUS BYPASS
LAST
TRIGGER
CAMERA
LINK
Zone 1
Garden
Dining
Kitchen
Fence
Corridor
Hall
Front Door
Back Door
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8
Ready
Ready
Ready
Ready
Ready
Ready
Ready
Ready
Camera
Link
Camera
Link
Camera
Link
Camera
Link
Camera
Link
Camera
Link
Camera
Link
Camera
Link
Arm the alarm
Configuration
DSA
Disarm the alarm
On/Off the light
If PGM are 104,
105, 106, 107
cannot turn on/off
manually. Refer
to Installer
manual for PGM
definition