13
Set Clock
All batches are
date
-stamped when created, and all
measurements are
time
-stamped (24 hour format)
when stored into these batches. It is therefore impor-
tant to keep both the date and time current using this
menu button. Alternatively, the date and time can be
automatically updated when the gage is connected
to
PosiSoft
using the
Gage Utilities -> Set Clock
func-
tion in
PosiSoft.
Layers
Measuring Multiple Layers
Measuring Multiple Layers
Advanced models only
Advanced models of the
PosiTector 200
are
capable of numerically displaying up to 3 individual
layer thicknesses in a multi-layer system.
To setup the Gage for multi-layer coatings:
1. Select
Layers
from the
Cal Settings
menu.
2. Select the number of layers using the
(-) and (+) buttons.
Press to accept the value.
Couplant
Probe
Layer 1
Substrate
Layer 2
Layer 3
Total thickness
Before setting up the Gage for multi-layer
measurement, it is recommended that you first take
measurements in single layer mode and interpret the
results using the
Graphics
option (see pg.11)
NOTE:
