7
www.defa.com
Remote Control | RF Wireless
Description
The HRC-11 provides a fast and easy way to customize LedgeCircle
®
RF fittings. Alter the settings using the
functions as described below. The fixture will emit a beep when a new setting has been received.
Permanent On/Off function
Press “ON/OFF” to select permanent ON or
permanent OFF mode. Press “AUTO”, “RESET” to
quit this mode.
Auto Mode
Press “AUTO” to initiate automatic mode. In this
mode the sensor and fitting behave according to
your selected settings.
Reset function
Press “RESET”, to restore default settings.
Shift +
This feature is not available with LedgeCircle
®
RF
fittings.
Power output
Press "Power 80%" to reduce power input to 80%.
This can be done during the first year or the first
10,000 hours of use, when the light output is usually
above the required amount. Note that fittings must
be returned to 100% manually (with the remote).
Scene programming
1. Press “Start” to begin programming.
2. Choose your settings for the scene with the appropriate buttons.
3. Press “Memory” to save the created scene in the remote control.
4. Press “Apply” to use the scene in each fitting.
Shift
Press "shift" to use secondary button values
marked in red. "Shift-mode" is active for 20
seconds.
Brig/-
Use these buttons to adjust the light Output during
the Hold Period.
