DEFA homeCLU, Руководство по установке

Страница: 40 / 44

www.defa.com 40 English
14. Failure handling
homeCLU automatically detects current sensor failure and loss of communication with the
charge point(s).
In the case of current sensor failure, homeCLU will go into limited operation mode.
In the case of communication loss, homeCLU will continue trying to establish
communication for 30 seconds. If communication is not re-established, the charge point
will stop charging by itself within 1-5 minutes (depending on the configuration of the charge
point). homeCLU recalculates the available current to the other charge points in use.
15. Limited operation mode
In limited operation mode, the charging current is reduced to 6A for all charge points
connected to the phase corresponding to the defective current sensor/sensor input.
16. Status indicator
Status indicator LED blinking pattern Status
Single blink Connected, not charging
Double blink Connected, charging
Triple blink Programming mode
Constant light Error
Constant light, single blink off Limited operation mode