DEES DSI-375, Руководство пользователя

Страница: 34 / 48

DSI may be programmed so that several configurations can operate at
the same time. This is called linking configurations. Since the complete
configuration string used to link multiple configurations may be lengthy
depending on the application, we suggest that once you have
determined which configurations are to be linked, you write the string
down. This will lessen any confusion.
Linking is accomplished in the configuration mode. The second, third and
fourth configuration is entered directly after the first. No special codes
are required.
For example, you may wish to utilize Configuration 5 which will provide
ringing to line button 3 even if the MBS is off-hook and a distinctive tone,
Configuration 6, when the DSI rings line button 3. The following keys
would be pressed:
Step 1: Apply power or disconnect and then reapply.
The LED will flash rapidly and you have 20 seconds to
commence programming.
Step 2: Press the then press then press
Step 3: Press the then press
Preview and select the tone you desire as described on page
24.
Step 4: Press the to lock in the tone.
Step 5: Press to enter this configuration.
In this example the following keys would be pressed:
30
Linking
Configurations
#
5
6
3
1
*
*
*
# 5 3 1 8 6 2
* *