DEES DSI-375, Руководство пользователя

Страница: 18 / 48

The DSI can operate in tandem with the CTA-369 or CRI-376. For more
information about these products see the last page of this guide. The two
units must be programmed separately and are connected together via
the LINE jack on the DSI.
1. Disconnect your MBS from the RJ-11 wall jack and plug it in to
RJ-11 jack marked STATION SET on the DSI.
2. Plug one end of the cord supplied with your DSI into the LINE jack
on your DSI and plug the other end of this cord into the STATION
SET plug on the CTA or CRI.
3. Plug one end of the cord supplied with the CTA or CRI into the LINE
jack on the CTA or CRI and the other end into the RJ-11 wall jack.
4. Plug the barrel connector of the power supply provided with the
DSI into the POWER socket on the DSI. Plug the power supply into
your wall outlet when ready to configure the DSI.
5. Plug the barrel connector of the power supply provided with the
CTA or CRI into the POWER socket of the CTA or CRI. Plug the
power supply into your wall outlet when ready to configure the CTA
or CRI.
Note:
Configuration must commence within 20 seconds of power up. See
Getting Started, Programming the DSI with the CTA-369 or CRI-376 on
page 8, for more information.
14
Installing the DSI
with the CTA-369
or CRI-376
DSI-375
MBS
Power
Auxiliary
Equipment
Telephone Line
or Wall Jack
Fig. 4
Power
CRI-376 or
CTA-369