P
R
O
O
F
P
R
O
O
F
Safety
DX,WW,RECEIVER -19-24AUG10-1/1
DX,ELEC,DISPLAY -19-13JAN15-1/1
AE77568,00001AD -19-23FEB16-1/1
Handle Electronic Components and Brackets
Safely
Falling while installing or removing electronic components
mounted on equipment can cause serious injury. Use a
ladder or platform to easily reach each mounting location.
Use sturdy and secure footholds and handholds. Do not
install or remove components in wet or icy conditions.
If installing or servicing a RTK base station on a tower or
other tall structure, use a certified climber.
If installing or servicing a global positioning receiver mast
used on an implement, use proper lifting techniques and
wear proper protective equipment. The mast is heavy and
can be awkward to handle. Two people are required when
mounting locations are not accessible from the ground
or from a service platform.
TS249
—UN—23AUG88
Use Electronic Display Properly
Electronic displays are secondary devices intended to
aid the operator in performing field operations, increase
comfort and provide entertainment. Displays offer a
wide range of functionality, are used in many different
machine system applications and can be used with other
secondary devices such as handheld electronic devices.
A secondary device is any device that is not required to
operate your machine for its primary use. The operator
is always responsible for safe operation and control of
the machine.
To prevent injury while operating the machine:
•
Position the display according to the installation
instructions. Ensure that the device is secured and
does not obstruct the driver’s view or interfere with the
machine operating controls.
•
Do not become distracted by the display. Stay alert. Pay
attention to the machine and surrounding environment.
•
Do not change settings or access any functions that
require prolonged use of the display controls while
machine is moving. Stop the machine in a safe location
and place in park position before attempting such
operations.
•
Never set the volume so high that you cannot hear
outside traffic and emergency vehicles.
To promote safe operation, certain functions of displays
may be disabled unless the machine movement is
restricted and/or has been placed in the park position.
Overriding this safety feature may violate applicable law
and can result in damage, serious injury, or death.
Only use available display functionality when conditions
permit you to do so safely and in accordance with
instructions provided. Always observe safe driving rules,
state, or local laws and traffic regulations when using any
secondary device.
Avoid Exposure to High Radio Frequency
Fields
Prevent injury from exposure to high radio frequency
fields at the Modular Telematics Gateway (MTG) 4G LTE
and Satellite antennas. Do not touch the MTG or Satellite
antennas while the system is transmitting. Always
disconnect power to the MTG and Satellite antennas
before installing or servicing.
The MTG and Satellite antennas should always be
separated from the operator or nearby persons by a
minimum distance of 20 cm (8 in.)
PC12632
—UN—04JUN10
05-3
062816
PN=7
Содержание JDLink
