2 6
| O A S I S P O L Y C A R B O N A T E V E R A N D A I N S T A L L A T I O N G U I D E
www.deponti.com
Patio Roof Manual – Type Bosco
29
CLICK !
19
14
1. Place the first roofing sheet between the rafters. Note: UV side up, the long condensation profile
with the tab down and on the gutter side.
2. Carefully cut the pre-fitted rubber seals in the aluminium end cover strip to size.
3. Pre-drill the end cover strip with a 3 mm drill bit (1 top – 1 bottom – 1 middle).
Fit the end cover strip. Position the cover strip flush with the rafter at the wall and gutter ends. At
the wall end the cover strip fits just a bit under the wall profile for extra anchoring.
Once the strip is positioned correctly, click the trim click strip into the end rafter (use a rubber
mallet).
4. Now screw the end cover strip to three points on the end rafter with long stainless steel screws
(1 top – 1 bottom – 1 middle).
1. Place the first roofing sheet between the rafters. Note: UV side up, the long condensation profile with the tab down and on the
gutter side.
2. Carefully cut the pre-fitted rubber seals in the aluminium end cover strip to size.
3. Pre-drill the end cover strip with a 3mm drill bit (1 top – 1 bottom – 1 middle). Fit the end cover strip. Position the cover strip
flush with the rafter at the wall and gutter ends. At the wall end the cover strip fits just a bit under the wall profile for extra
anchoring. Once the strip is positioned correctly, click the trim click strip into the end rafter (use a rubber mallet).
4. Now screw the end cover strip to three points on the end rafter with long stainless steel screws (1 top – 1 bottom – 1 middle).
