background image

4

BACK TO INDEX

SECTION 1 - INTRODUCTION

1.1  PRODUCT MANUAL

Please take the time to read and digest this product manual and pay attention to all the 
instructions and warnings contained within. Save it for future reference. We recommend that you 
upload it to a cloud storage service or save it to your computer or mobile device to enable access 
to it anytime, wherever you are.

The COSMIQ Product Manual contains vital information for you to become familiar with your 
device. Ensure that you fully understand the displays, functions, settings and limitations that 
govern the use of this dive computer. If you have any questions about the Product Manual or the 
dive computer, contact the Deepblu Sales Ambassador or COSMIQ Reseller who sold you the 
dive computer, speak to a trained dive instructor or contact Deepblu’s support team before diving 
with it.

Be mindful that you are responsible for your own safety. When used correctly, in accordance with 
your dive training and the instructions provided in this manual, the COSMIQ Dive Companion is a 
powerful instrument for supporting recreational/sport diving.

If you attempt to dive deeper than 40 meters/130 feet, do decompression or staged dives, or dive 
in any enclosed or challenging environments such as in caves, wrecks, ice, high altitude lakes, or 
any sort of penetration diving using trimix, or any other kind of air mix with oxygen levels lower 
than 21% or higher than 40%, or any technical diving, please DO NOT use this device as your 
primary recording device, gauge or computer. The COSMIQ Dive Companion is only designed 
and intended for use in recreational scuba diving and apnea/freediving.

1.2  COSMIQ FIRMWARE

COSMIQ’s operating system is constantly being improved by Deepblu’s development team to 
enhance the features and functions of the dive computer. Firmware updates to the operating 
system are offered periodically over-the-air (OTA) and can be installed by pairing and syncing 
COSMIQ with the Deepblu app.

It is very important that you update the firmware on your COSMIQ each time an update is 
available, as each firmware update contains new improvements, modifications and bug fixes which 
can help to optimize your diving experience with COSMIQ.

The instructions contained in this Product Manual are consistent with the features and 

functions available with COSMIQ Firmware Version 0.7. If your COSMIQ is not running 

Firmware Version 0.7, please sync your COSMIQ with the Deepblu app and install the 

firmware update as soon as possible.

The firmware version currently installed on COSMIQ is indicated in the bottom right hand corner 
of the display screen when COSMIQ is in 

Sync Mode

.

Содержание COSMIQ DIVE COMPANION





































Отзывы: