For technical support on our products or addi�onal accessories, please call us at 248-624-7710 or visit our web site:
www.dedoes.com
Cyclone Paint Shaker User Manual
Part No: 0910P (Shaker) / 0915P (Pedestal)
Page 5
PART # M-312 KD RV.8 2019-09-25
SPECIFICATIONS
Air
Pressure:
90 to 120 PSI
(lbs./in2
gage) (600 to
1200 kPa). Line
pressure
over
150 PSI
requires
a regulator and relief
valve
upstream
of air hose.
Air Inlet
Threads:
¼ inch
PTF
(Seal with thread
tape).
Shake
Angle:
If
opera�ng
at
over
120 PSI
pressure, the shake angle must be set to 30° (see page 4) with
a full gallon can
clamped,
air
at maximum
normal line
pressure. The shaker is supplied with a 30° shake angle.
(See
“OPERATION”)
Air
Consump�on:
Approximately
4.3
CFM
(0.002 M3/sec) free air with 1 gallon (U.S.) 12
lb.
can at 30° shake angle.
Speed:
135RPM to 800 RPM. Suggested at 700 c
ycles/minute at 30° shake
angle. Adjustable
at control
valve, automa�cally
compensates
for can
size
.
Capacity:
The shaker can hold half
liter cans, and pint
cans through four liter round cans.
Including gallons,
imperial
gallons,
most aerosols (with
caps)
and square
gallons.
Maximum Shake Weight:
The suggested maximum weight is
16
lbs.
gross can weight.
Recommended Shake
Time:
Refer to your paint manufacturers recommenda�on.
Final
Filter:
Bronze,
spring-retained
40 micron
element behind
inlet
elbow (M-307).
Oil
Consump�on:
Install the automa�c lubricator and adjust the lubricator by the turning ver�cal line on the drip rate dial
clockwise un�l it stops and then turn it counter clockwise to number 4. When not using the lubricator,
add three d
rops of air
tool oil at air inlet before every use. Allow a ten minute
maximum
opera�on �me between
manual oiling.
Recommended
Oil:
Petroleum 5W to 10W Non-detergent Rust
Inhibi�ng
Air Tool Oil such as
Lubriplate Rockwell
10R. Oil
should not contain gum
removers
or petroleum
dis�llates.
Do
not
use
motor
oil.
Never use silicone oils or grease in a paint
shop.
Greas
e:
Mul�purpose
calcium or
lithium-based chassis grease.
Re-lubricate both Zerk fi�ngs every
3 to 6
months,
or more
o�en
in se
vere service.
Cyclone Air Shaker - Dedoes PN# 0910P
20cm W x 26.5cm D x 35.5cm H (8in W x 10.5in D x 14in H)
Weight: 9 kgs (20 lbs)
Pedestal - Dedoes PN# 0915P
27cm W x 21cm D x 78cm H (10.75in W x 8.25in D x 30.75in H)
Weight: 7 kgs (15 lbs)
