Deditec ETH-RELAIS-8, Описание аппаратуры

Страница: 64 / 109

Software |
Seite 64
5.3.8.2. Usage of the VIs in LabVIEW
Some functions of the DELIB-library are expecting a string as a parameter value.
This example shows how to use such functions in LabVIEW.
We will use the A/D converter function which is used to set the voltage range as
an example.
The definition of this function is:
void DapiADSetMode(ULONG handle, ULONG ch, ULONG mode);
The voltage ranges for this function are already defined in the DELIB-library.
Example code in C/C++:
DapiADSetMode(handle, 0, ADDA_MODE_UNIPOL_5V);
This code can also be written like this:
DapiADSetMode(handle, 0, 1);
In the delib.h file can you read the hexadecimal values to determine the modes.
The hex values must be convertet to decimal.
After the installation of the DELIB-library, the delib.h file is located in the
following directory: C:\Programs\Deditec\DELIB\Include\delib.h