Deditec ETH-RELAIS-8 Скачать руководство пользователя страница 11

Страница: 11 / 109

Hardware description |

Seite

DIP Switch
2

Mode / Description

EEPROM is write protected

If the write protection is on, no settings can be configured via
the DELIB-Configuration Utility.

OFF

EEPROM write protection is off

DIP Switch
3

Mode / Description

The  settings  from  the  EEPROM  will  be  ignored  on  module
start.  The  modul    will  start  with  factory  settings.  The  settings
which  will  be  ignored  are  the  IP-address,  gateway,  subnet
mask and DHCP.

Factory settings:

IP: 192.168.1.1

Subnet mask: 255.255.255.0

Gateway: 192.168.1.254

DHCP: Off

The settings in the EEPROM will not be changed.

OFF

The module will start with the settings from the EEPROM

DIP Switch
4

Mode / Description

Modul will start normally.

OFF

Only for service.

The module will stay in bootloader mode and won't start the
firmware. All settings in the EEPROM will not be changed.

Содержание ETH-RELAIS-8














































































































Результаты поиска

Содержание ETH-RELAIS-8

Отзывы:

Deditec ETH-RELAIS-8, Описание аппаратуры, Страница: 11 / 109

Результаты поиска

Содержание ETH-RELAIS-8

Отзывы: