DeDietrich PSS500, Инструкция по эксплуатации

Страница: 38 / 68

push the light button. The light indicator will
switch off. The light has no negative effect on
the quality on the wine.
Freezer Control panel
1 2 3 4 5 6 8
7 9
1 Pilot light
2 ON/OFF switch
3 Temperature regulator (warmest)
4 Temperature indicator
5 Temperature regulator (coldest)
6 Auto Freeze light
7 Auto Freeze button
8 Alarm light
9 Alarm reset button
Switching on
Insert the plug into the wall socket.
Press the ON/OFF switch .
The Pilot Light will light up.
Important! At start-up the displayed
temperature don't correspond with the set
temperature until stabilised (within 24 hours).
Switching off
Press ON/OFF switch until a countdown
from -3 -2 -1 is completed.
The temperature indicator switches off. The
Pilot light switches off.
Temperature regulation
The temperature can be adjusted between
-15°C and -24°C.
By pressing the Temperature regulators , the
current temperature setting flashes on the
Temperature indicator. It is possible to mod-
ify the setting temperature only with flashed
indicator. To set a warmer temperature,
press warmest Temperature regulator . To
set a colder temperature, press coldest Tem-
perature regulator. The Temperature indica-
tor displays the newly selected temperature
for a few seconds and then shows again the
inside compartment temperature.
The newly selected-temperature must be
reached after 24 hours.
Temperature indicator
During normal functioning the Temperature
indicator shows the temperature inside the
freezer.
Important! Difference between the
temperature displayed and temperature
setting is normal. Especially when:
• a new setting has recently been selected.
• the door has been left open for a long time.
• warm food has been placed in the com-
partment.
Auto Freeze function
You can activate the Auto Freeze function by
pressing the Auto Freeze button.
The Auto Freeze light will light up.
This function stops automatically after 52
hours.
It is possible to deactivate the function at any
time by pressingAuto Freeze button.
The Auto Freeze light will switch off.
High temperature alarm
In the event of an abnormal temperature rise
inside the freezer (e.g. power cut) Alarm light
will start to flash and a buzzer will sound.
After the temperature has returned to nor-
mal, the Alarm light will continue to flash, al-
though the buzzer has stopped.
When the Alarm reset button is pressed, the
warmest temperature reached in the com-
partment flashes on the Temperature indica-
tor .
If the power has been off for a long time, fro-
zen food should be consumed as quickly as
possible, or cooked and then re-frozen.
38