5
21/03/05 -
300005222-001-A
INNOVENS - MC 35E / MC 45 / MC 65 / MC 90
Keys accessible when the flap is closed
Keys accessible when the flap is open
1 Temperature setting keys
2%
:
Daytime operating temperature (comfort)
2$
:
Reduced operating temperature
2
:
Domestic hot water temperature
When one of these keys is pressed, the active time programme
corresponding to the circuit is displayed in the graphic bar.
2 Setting keys + and -
3 Operating mode selection keys AUTO :
automatic
The following keys are used to override the
AUTO
mode
%
:
forced operation at comfort temperature until midnignt
$
:
forced operation at reduced temperature until midnight
%
:
Antifreeze mode
:
Tank filling enabled mode
4 Key for access to setting and measurements
J
:
Page scrolling
I
:
Line scrolling
H
:
Return to the previous line
5
#
: Manual "Summer" shutdown key
#
+ Su
: The heating is shut down but the domestic hot water
function continues.
This function is independent of the "automatic heating
shutdown" function in summer when the outside
temperature exceeds the outside heating shutdown
temperature (in this case, only the symbol
Su
appears in the
display)
6 STANDARD : "Standard" program key.
Pressing the
STANDARD key for
5
seconds activates
P1
for circuits
A
,
B
and
C
and is used to replace all customised programs with
their factory settings
P1 :
Monday to Sunday : 6hours - 22hours
P2 :
Monday to Sunday : 4hours - 21hours
P3 :
Monday to Friday : 5hours - 8hours, 16hours - 22hours
Saturday and Sunday : 7hours - 23hours
P4 :
Monday to Sunday : 6hours - 8hours, 11hours -
13hours30, 16hours - 22hours; Saturday : 6hours - 23hours;
Sunday : 7hours - 23hours
Hot water program : 5
hours - 22hours (Reheating enabled)
Program AUXIL. : 6
hours - 22hours
7
K
:
Fitter settings access key
8 Programming keys
%O
"Comfort" mode (in half-hours) program key or enable
tank filling (dark area)
$P
"Low" mode (in half-hours) program key or disable
tank filling (light area)
S
Return to graph program bar
A.B.C
Selection key for the displayed circuit A, B or C
PROG
Displayed heating program selection key P1, P2, P3 or
P4. The regulator has 4 original heating programmes P1, P2,
P3 and P4 preset in the factory. See Table of programmes.
Programs P2, P3 and P4 may be customised. See
Customised programmes.
