DeDietrich GT 530A Series, Руководство по сборке, установке и обслуживанию, Страница: 54 / 86

52
GT 530A DDR_G30A/AE _IO_V4.0 09/2013
As Set up
45.
46.
Installing the boiler door and lower crosspiece bracket (MR 245 or MR 246)
1
2
1. Put the boiler door in place (package MR245 or MR246)
and fasten with 2 tapping screws (Ø 3.94 x 12.7). The
boiler door may be cut in 2 at the micro-joints.
2. Attach the casing support lower crosspiece (package
MR245 or MR246) with 2 screws (H6 x 20) and 2 serrated
washers.
Note :
- A 1/8 diameter hole needs to be drilled on each side of
the burner mounting plate to accept the 2 self tapping
screws.
- On the larger model bolt hole patterns, you must clear
the boiler door to clear the 4 mounting studs for the
burner door
Installing the control panel bracket (MR245 or MR246)
2
1
3
2
1. Fit the 4 “Rapid” nuts on the front of the cable
channels.
2. Fit the “Rapid” nuts in the slots:
4 “Rapid” nuts for 15 to 17 sections.
8 “Rapid” nuts for 18 to 25 sections.
3. Attach the control panel bracket (package MR245
or MR246) underneath the 2 cable channels by
means of 2 screws (H8 x 16) and 2 serrated
washers.