49
You have doubts about whether your hob is working correctly .... ......
this does not
necessarily mean there is a breakdown.
Nevertheless, check the following points
IF YOU REALIZE
THAT
WHAT SHOULD
YOU DO?
ERROR
CODES
➡
This is the normal start-up procedu-
re for your hob when the power is tur-
ned on.
➡
If you have pressed the main "Off"
button
then this is normal.
✓
Wait for a few seconds until the
display goes out.
✓
Your hob is ready to use.
➤
2 bleeps followed by
the displaying of F1 or F2
or F3 or F...
on the timer
, then
s h o w i n g
A2 or A2 or A…
➡
The current is cut off.
✓
Check that you have an electrical
current.
✓
If you have current and the fault still
continues, call the After Sales Service
department.
➤
You are unable to
control your hob and the
displays are blank.
➡
Your burner is unable to ignite.
✓
Check that the gas is fully open or
that the burners are correctly assem-
bled.
✓
Check that the injectors correspond
to the gas being used (please see the
technical characteristics table).
✓
Check that there are definitely sparks
at the corresponding burner.
✓
After carrying out all of these checks,
try to turn it on again by pressing
.
➤
shows E4 and
the hob bleeps. One of
the indicators for the
faulty burner lights up.
➡
You have suffered a power cut or
have pressed the main "Off"
button
.
✓
Press
to use your hob normally.
➤
displays a fla-
shing time setting. (Time
remaining before the cur-
rent cuts off).
➡
The burner concerned is unusable.
➡
However, you can still use the other
burners.
✓
Call the After Sales Service dept, and
be sure to tell them which error code is
displayed.
➡
Your hob cannot be used.
✓
Turn off the gas.
✓
Call your After Sales Service dept.
and be sure to tell them which error co-
de is displayed.
➤
displays E6.
Minor troubleshooting
➡
You have a flame or a hot object on
one of the safety features (thermo-
couple).
✓
Turn off the gas.
✓
Call your After Sales Service dept.
➤
displays E7:
one of the indicators
lights up to show the
faulty burner.
➡
The table has 2 faults.
✓
Call the After Sales Service dept and
tell them which indicators have lit up.
➤
displays EE and
several indicators light up
to show the faulty bur-
ners.
- When an error code is displayed, this automatically prevents all use of the timer
.
➤
displays E2 or
E5, one of the indicators
for the faulty burner
flashes and you hear a
bleep.
99643032_A_ML_FR-EN.qxp 21/08/2007 14:20 Page 49
