12
EN
2 / USING YOUR APPLIANCE
• Elapsed time
This function displays the time elapsed since
the last time the power setting was adjusted
on a given burner.
To use this function, press the K button. The
elapsed time flashes on the timer display.
If you want cooking to end in a specific period,
press the K button then, within 5 seconds,
slide your finger on the timer slider to increase
the cooking time that you wish to set. The time
will display for 3 seconds, then the remaining
cooking time will appear. A beep will confirm
your choice.
This function can be used with or without
the timer.
Note: If a time is displayed on the timer, it
cannot be changed for 5 seconds after
pressing the K button. Once this period has
elapsed, you may change your cooking time.
• SWITCH
This function lets you move a pan from one
zone to another, keeping the original settings
(power level and time).
1- Press button M briefly. A short beep
sounds and you can move the pan to the
new zone.
2- Press button M briefly. The information is
displayed on the new burner. The original
cooking zone switches off when the set-
tings are displayed on the new zone.
- If there is no pan present before button M is
pressed, a long beep sounds and the function
is cancelled.
- If button M is pressed and more than one
pan is moved, the function is cancelled and
NO
appears in the display.
- For models DTI1047C, DTI1047CG,
DTI1167XE and DTI1177X, if you move a pan
from one complete cooking zone to another
complete cooking zone, the function is can-
celled and NO
appears in the display.
- If the “Switch” function activates more than
one new zone, the function is cancelled and
NO
appears in the display.
• Adjustment of power presets
This function allows you to change the power
levels defined in the presets (except for the
boost).
- Your cooking hob must be turned off.
- Select the preset I to be changed, by kee-
ping your finger on it.
- Set the new power level by sliding your finger
over the power slider.
- A beep will confirm your action after a few
moments.
N.B.:
The power levels must be between:
- 1 and 5 for the first button (4 by default).
- 6 and 10 for the second (8 by default).
- 11 and 15 for the third (15 by default).
B
A
C
D
H
I
J
K
L M
N
O
