DeDietrich DTG1410X, Руководство по установке и использованию

Страница: 22 / 29

22
F itting recommendations (cont'd)
- Place the hob in position in the cutout on the worktop, pulling it
forward as far as possible.
- Put the burners, caps and pan grates back in position.
- Connect the hob power supply cable to the electrical installation of the
kitchen. (See "Electrical connections”).
- Connect the hob to the gas.
If you wish you can lock the hob into position using attachments that
come with screws (see right picture)) and are secured to the corners of
the housing.
Only use the holes provided.
Stop screwing when the lug starts to bend.
Do not use a power screwdriver.
The panel of this built-in hob is made of tempered glass which is safer than normal glass for this application. However,
the following safety precautions for using built-in hob with glass top panel
should also be noted in order to prevent the glass top panel from breaking
：
1. Clean the burner assembly frequently to maintain a clear gas passage on the flame distributor. Clean and tidy up
the flame distributor after spillage of food and liquid once the burner assembly cooled down.
2. Turn off the gas appliance immediately if abnormal noise propagates from the gas appliance and contact gas
supply company or gas hob importer for inspection.
3. Do not use oversized utensils for cooking.
4. Do not impact the glass surface with hard objects or place heavy objects on the glass surface