DeDietrich DPV7650B, Руководство пользователя

Страница: 26 / 104

•
1
INSTALLATION
1.1 UNPACKING
Remove all the protective packing
pieces. Check and respect the
appliance’s characteristics that appear
on the nameplate
Note the service and standard
references shown on this plate in the
boxes below for future reference.
1. 2 INSTALLATION
Emplacement with cutlery drawer
If you wish to mount furniture or a drawer
under the hob, a separation board must
be fitted between the two. Accidental
contact with the hot surface of the
device’s housing is thus prevented.
The board must be fitted 20 mm under
the bottom cover of the hob. (1.2.1)
Installation above an oven See the
minimum distances scheme (1.2.3)
Installation of the seal see scheme
(1.2.4)
1.3 ELECTRICAL CONNECTION
Before you connect the hob to the mains,
check if the voltage and frequency match
those specified on the hob label, which is
placed under the hob or on the
Guarantee card, or if applicable on the
technical data sheet, which you must
keep together with this manual
throughout the product’s service life.
The electrical connection will be via an
all-pole circuit breaker or plug, whenever
accessible, in accordance with
the current and with a minimum 3
mm distance between contacts. This
ensures disconnection in emergencies
and allows hob cleaning.
Only the official technical service can
handle or repair the appliance,
including replacement of the power
cable.
Ensure that the inlet cable does not
come into contact with the hob
housing or the oven housing, if it is
installed in the same unit.
Warning:
The electrical connection must be
properly grounded, following current
regulations, otherwise the hob may
malfunction.
Unusual high power surges
can damage the control system (like with
any electrical appliance).
Keep the Guarantee Certificate or
the technical data sheet together with
the instructions manual throughout
the product’s service life. These
contain important technical information.
23
green-yellow
blue
brown
grey
black