e n g l i s h
UNPACKING
Remove all the protection elements. Check and respect
the appliance’s characteristics that appear on the
nameplate (1.1.1)
CHOICE OF LOCATION AND BUILDING IN
The diagrams show the dimensions of a cabinet that will be
able to hold your oven.
This appliance may be installed either under a worktop
(1.2.1) or in a column (1.2.2). If the cabinet is open, its
opening must be 70 mm maximum.
Your oven has optimised air circulation that allows it to
achieve remarkable cooking and cleaning results if the
following guidelines are followed :
Center the oven in the cabinet to ensure a minimum
distance of 10 mm with adjacent cabinets (1.2.3). The
material or coating of the cabinet must be heat-resistant. For
greater stability, attach the oven in the cabinet with two
screws through the holes provided for this purpose on either
side of the front inner panel.
- Drill a 2 mm diameter hole in the cabinet panel to avoid
splitting the wood.
- Attach the oven with the two screws (1.2.4) .
Tip:
To be certain that you have properly installed your
appliance, do not hesitate to call on a household
appliance specialist.
ELECTRIC CONNECTION
The appliance must be recess-fitted correctly to ensure
electrical safety.
The electrical connections are made before the appliance is
installed in its housing.
Ensure that:
- the electrical installation has sufficient voltage,
- the electrical wires are in good condition,
- the diameter of the wires complies with the installation
requirements.
During maintenance operations, the appliance must be
unplugged from the electrical grid; fuses must be switched
off or removed.
Warning:
The safety wire (green-yellow) is connected to the
appliance’s
terminal and must be connected to the
earth terminal of the electrical set-up.
The fuse in your set-up must be 16 amperes.
If the electrical installation in your residence requires
any changes in order to hook up your appliance, call
upon a professional electrician. If the oven malfunctions
in any way, unplug the appliance or remove the fuse
corresponding to the sector where the oven is hooked
up.
No pyrolysis ovens:
The appliance must be connected to the mains with a red
single-phase connection with the neutral (blue) connection
guaranteed (1.3.1). Fit the oven into the space, ensuring
there is no excess cable in the upper part.
Screw it to the setting using the two screws supplied.
1.1
1.2
1.3
Installation
1
