- At the end of the (programmed) cooking time:
- the oven stops,
-
flashes (2.5.6).
- A series of beeps are emitted for a few
minutes. The beeps can be stopped by pressing
any button.
•
PROGRAMMED COOKING:
Cooking with delayed start and selected
end of cooking time
Proceed as for programmed cooking
(immediate start).
- Press the
button to make the end of
cooking indicator flash (2.6.1).
The end of cooking time symbol flashes to
indicate that it may now be set (2.6.2).
- Turn the selector to set the end of cooking
time (2.6.3).
Example: end of cooking at 13.30 (2.6.4).
- Press the control knob to confirm
In case of no manual confirmation, the end of
cooking time is automatically saved after a few
seconds.
The cooking end time display stops flashing.
The display returns to the time of day.
An animation in the display indicates that the
oven is in delayed cooking mode (2.6.5).
When these 3 steps have been completed, the
oven heating start time is delayed so that
cooking ends at 13:30. When the cooking is
complete (programmed end of cooking time),
the oven stops and the cooking end indicator
and
0h00
flash. A series of beeps sounds for a
few seconds. The beeps may be stopped by
pressing any button.
•
USING THE TIMER FUNCTION:
This function can be accessed either
independently from the oven or during a cooking
operation, but will not stop any cooking in
progress.
In the first case:
- Press the
button once (2.7.1).
The timer symbol
and
0m00s
flash (2.7.2). Set the time using the
control knob. Press the knob again to confirm.
The display stops flashing after a few seconds
and the timer starts to run, counting down the
time in seconds. Once the time has elapsed, the
timer emits a series of beeps to let you know.
The beeps may be stopped by pressing any
touch control.
In the second case, during a cooking operation:
- Press the
button 3 times to access the
timer Carry on in the same way as the
independent timer and confirm after adjusting
the time. The cooking continues and the timer
starts. Once the time is complete, stop the beeps
by pressing the control knob.
Caution
You can modify or cancel at any time
the “minute minder” by pressing the button
and by reducing the time to 0:00.
•
LOCKING THE CONTROLS:
(child safety device)
You have the option of preventing access
to the oven controls by taking the following
steps when the oven is off:
- Press the
STOP
and
buttons at the same
time for a few seconds (2.8.1).
A padlock appears in the display (2.8.2).
Access to the oven’s controls is locked.
To unlock it:
- Press the
STOP
and
buttons at the same
time for a few seconds.
The oven controls are once again accessible.
•
THE “STAND BY” FUNCTION:
Your oven has a standby function. The
display indicates the time. After 4 minutes with
no action by the user, the oven display returns to
(2.9.1). None of the buttons can be used. To
reactivate the display, use the function selector.
The oven display is active once again and
cooking is now possible.
•
ADJUSTING CONTRAST:
- Adjust the time to
00:10
(see section
“Resetting the time”)
- Press the
T°C
button until
-CO-
is displayed
(2.10.1).
- Adjust the contrast, using the control knob
2.6
a
a
a
a
2.7
2.9
2.8
2.10
a
e n g l i s h
Содержание DME1140B
Страница 1: ......
