DeDietrich BMR 80, Руководство по установке

Страница: 9 / 20

9
29/05/06 -300008885-001-A BMR 80
3 Connecting the calorifier to the primary circuit (Exchanger)
Hydraulic connection between boiler and calorifier exchanger is done
using connection kit
HG 29
.
4 Connecting the tank to the domestic water circuit (secondary circuit)
When making the connections, it is imperative that the standards and
corresponding local directives are respected. These domestic hot water tanks can operate at a maximum operating
pressure of 10 bars. As a general rule, the tanks operate at 7 bars.
4.1 Specific precautions
Before making the connection, rinse the domestic water inlet
pipes to prevent the introduction of metal or other particles into the
DHW tank.
4.2 Provision for Switzerland
Make the connections according to the instructions of the Société
Suisse de l'Industrie du Gaz et des Eaux. Comply with local
instructions from water distribution plants.
C000692