DeDietrich ALEZIO O HYBRID, Руководство пользователя

Страница: 27 / 56

5 Operation
5.1 Start-up
1. Switch on the outdoor unit and the indoor module.
2. The heat pump begins its start-up cycle.
If the start-up cycle runs normally, an automatic venting cycle is
initiated. Otherwise, an error message is displayed.
5.2 Description of the home screen
If the control panel is in standby, turn the selection button to access the
home screen.
1 Symbol for the appliance and circuit flow temperature
2 Hydraulic pressure
3 Temperature measured by the outdoor temperature sensor
4 Status of the appliance
5.3 Operation
Tab.17 Changing my heating temperature
Function Access Settings
Change the room tempera­
ture.
Select the Zone to be changed with the rotary
button, for example CIRCA > Set heating
temperatures
– Select the activity you want to modify.
– Change the temperature for the activity.
Change the room tempera­
ture temporarily.
Select the Zone to be changed with the rotary
button, for example CIRCA > Operating
mode > Temporary heating temperature change
– Set the temporary room setpoint for the cir­
cuit selected.
– Define the end time for the temporary set­
point.
Tab.18 Changing my domestic hot water temperature
Function Access Settings
Change the domestic hot
water setpoint.
Select the Zone Domestic Hot Water with
the rotary button > Set heating temperatures
Change the comfort or reduced domestic hot
water setpoint.
Force domestic hot water
production (override).
Select the Zone Domestic Hot Water with
the rotary button > Operating mode > Temporary
heating temperature change
– Define the end time for the temporary Com­
fort setpoint.
Force domestic hot water production at the
comfort domestic hot water setpoint tempera­
ture
Tab.19 Changing my cooling temperature
Function Access Settings
Change the cooling tem­
perature.
The installer must have au­
thorised the cooling func­
tion.
Select the Zone to be changed with the rotary
button, for example CIRCB > Set cooling
temperatures
– Select the activity you want to modify.
– Change the temperature for the activity.
Fig.11
MW-3001019-3
1
4
3
2
5 Operation
7763552 - v02 - 29062020 200 ESL HYBRID 27