Dedicated Micros CamVu 500, Инструкция по установке и эксплуатации

Страница: 91 / 124

Dedicated Micros ©2011
91
CamV
u 500
Firewall
This page allows configuration of the on-board firewall. The top ports are pre-configured with typical settings
that can be edited, there are user defined ports available at the bottom of the list. Preconfigured ports can be
disabled by unchecking the ‘open’ box.
Enable PING response By default this option is enabled and allows the unit to be pinged.
Disabling this option will make the unit less visible on the network
Table Entry Up to 32 Configuration settings may be entered.
Service Name Details the assigned name of the service using the opened port on
the firewall.
Port Start Displays the start of the port range used by the service
Port End Displays the end of the port range used by the service
Note: To open a single port, enter the same number in the Port Start and Port End boxes.
Type Displays the type of port to open, select from TCP or UDP.
Open Displays if the port is open or not. Closing a port activates the firewall.
Refresh (Purple) Refreshes the current page