SOURCES - Balanced and Unbalanced
The Zen TORII Mono’s feature two
fully balanced XLR input jacks and
one single-ended (unbalanced)
RCA input jack.
The two XLR jacks are selectable
via a switch on the front half of the
amplifier so that you can potentially
have a feed from two different
sources and select between them.
The RCA jack is active all the time
and is unaffected by the source
switch. That means that even if you have the XLR jacks hooked up, as soon as you
plug in the RCA jack it will take priority and that is all you will hear. The RCA jack must
not be shorted with a shorting plug when not in use.
Note: Select your source
prior to turning the
amplifier on because
access the switch
without touching the hot
output tubes will be
difficult.
The switch is located
here for sonic reasons.
Behind the switch are the
two Jensen Input
Transformers that
connect to the XLR
jacks.
O W N E R S M A N U A L
Decware High Fidelity Engineering Co., East Peoria IL, USA www.decware.com
Source Switch
