DeCrane Aerospace Audio International
DVD-9101-201-x Installation & Operation Manual
Document # 540339, Rev A, 02/2008
Page 17 of 24
The user can enter SLOW FORWARD Mode by pressing the FORWARD
Button. (Not a front panel option. This function is accessible by remotes and
data bus connected devices only)
The user can Step through the video by repeatedly pressing the PAUSE
Button.
Normal playback can be resumed by pressing the PLAY Button.
DVD Audio/Audio CD/MP3 CD:
Press the PAUSE Button once to place the DVD Player in PAUSE
Mode.
Normal playback can be resumed by pressing either the PAUSE
Button or the PLAY Button.
STOP BUTTON
Press the STOP Button during playback to place the DVD Player in HOLD Mode.
Pressing the PLAY Button at this point will resume playback from the held point.
In lieu of remote or RS-485 commands, the user can press and hold the STOP
Button for approximately five (5) seconds to access the DVD Player’s Setup
Menu.
4.3
Supported RS-485 and IR Commands
EJECT
This button functions exactly as the front panel EJECT Button: The EJECT Button
allows the user to eject the DVD. Pressing the EJECT Button will allow the user to
gently pull the DVD out of the mechanism.
SETUP
The SETUP Button toggles display of the Setup Menu, which allows the user to access
or modify various settings. Use the navigation buttons to advance through the available
settings:
GENERAL SETUP
-
ANGLE MARK:
Can be turned on or off. When this feature is turned on, an
ANGLE MARK display appears on the screen for scenes that were shot at
different angles.
-
OSD LANGUAGE:
Select the language that the OSD setup screens are
displayed in.