Connecting the System
For your convenience, the monitor,
controller, printer, and cables are all
labeled.
•
The Blue #3 cable goes from the monitor (#3 side in
monitor) to the blue port on the controller
•
The Pink C plug goes into the back of the monitor
•
The Sea Foam plug goes into the back of the controller
•
The Red #2 cable goes from the printer (#2 side in
printer) to the red port on the controller
•
The Red A cable goes from the printer (A side in
printer) to the power strip
•
The Blue B cable goes from the controller (B side in
controller) to the power strip
•
Plug the power cable for the monitor into the power
strip
Please note: Always plug all three power cables
into the provided power strip. Do not plug
anything else into the strip.
Содержание PhotoCake IV
Страница 1: ...Setting Up Your New PhotoCake IV System...
