Instruction manual
Automatic phone announcement unit Telealarm GSM
Page 8
7 Initial operation
7.1 Important advices
Before every use, please examine the device, cable and plug on damages.
In the event of fault or malfunction, stop the device at once and secure it. Any
faults must be rectified immediately.
The device and their electrical connections may not be operated in a damp or wet
environment.
Do not expose the device in operational state to any vibrations or shocks.
Do not operate the automatic announcement unit in the contaminated area!
7.2 Insertion of the SIM Card
If the SIM Card is protected through a PIN Number, you have to memorise this
number before inserting the SIM Card in the telealarm device (Entry #20, see under
9.1 possible settings / Code-chart).
Switch the device off and unplug.
Unscrew the protective cover and remove it.
With a sharp object, e.g. a pen, push the yellow point. The
SIM-Card-Holder is pressed out and can be extracted.
Insert the SIM-Card in the holder. Please mind the position of
the oblique edge.
Insert the SIM-Card-Holder. Absolutely mind the right
installation position!
Replace the protective cover.
