Instruction Manual
Negative Pressure Unit green dec G 700
Version 3
Page 34
11. Declaration of Conformity
EC Declaration of Conformity acc. to Machinery Directive 2006/42 / EC Annex II 1.A
The manufacturer
deconta GmbH
Im Geer 20
46419 Isselburg
hereby declares that the following product
Product designation:
green dec G 700
Type designation:
G 700
Serial number:
see type plate
Commercial designation:
Negative Pressure Unit green dec G 700
Year of construction:
see type plate
Description:
Negative Pressure Unit green dec G 700
complies with all applicable regulations of the above mentioned directive and the other applicable directives (hereafter),
including the amendments applicable at the time of the declaration. The sole responsibility for issuing this Declaration
of Conformity lies with the manufacturer.
The protection objectives of the following EU directives have been complied with:
Low Voltage Directive 2014/35 / EU
The following harmonised standards were applied:
EN 349:1993+A1:2008
Safety of machinery – minimum gaps to avoid crushing or parts of the human body
EN 50274:2002/AC:2009
Low-voltage switchgear and controlgear assemblies - Protection against electric
shock - Protection against accidental direct contact with dangerous active parts
EN 50274:2002
Low-voltage switchgear and controlgear assemblies - Protection against electric
shock - Protection against accidental direct contact with dangerous active parts
EN 60204-1:2006/A1:2009
Safety of machinery - Electrical equipment of machines - Part 1: General
requirements (IEC 60204-1: 2005 / A1: 2008)
EN 60204-1:2006/AC:2010
Safety of machinery - Electrical equipment of machines - Part 1: General
requirements (IEC 60204-1: 2005 (modified))
EN 60335-2-69:2012
Safety of household and similar electrical appliances - Part 2-69: Particular
requirements for wet and dry vacuum cleaners (IEC 60335-2-69: 2012 (modified))
EN ISO 13850:2015
Machine safety - Emergency stop – Principles of design (ISO 13850: 2015)
EN ISO 13857:2008
Safety of machinery – Safety distances to prevent hazard zones being reached by
upper and lower limbs (ISO 13857:2008)
Name and address of the person authorised to compile the technical documentation:
Krolle, Christian
Place: Isselburg
Date: 03.12.2019
_______________________________
(Signature)
Managing Director
