deconta C 130 L, Инструкция по эксплуатации

Страница: 8 / 15

Instruction manual
Water treatment boiler system C 130 L
page 8

Unplug unit

Connect hoses:
o
Optionally connect „water inlet“ with pipeline system or fill tank via filling
opening by hand
o
Connect „warm water shower water“ with shower roof
o
Connect „Sewage IN“ with shower floor
o
Connect „Sewage OUT“ with sewerage

Fill sewage pump with water

Fill filter housing of 220µ filter with water

Tighten cap nut of filter housing hand-tight

Connect to power

Set temperature of thermostat (red pointer) to max. 40°C. The temperature can be
checked on the temperature gauge (black pointer).

Turn Switch automatic operation to „1“.

The unit is now ready-to-operate

In operation mode condensation water may emerge from „overflow“. Do not close
overflow. If water drips, put a bucket underneath.
Thermostat
Control lamp tank empty
Control lamp heating
Button sewage pump start
Control lamp filling
Switch automatic operation