Mounting set
INFM7X02
__________________________________________________________________________________
__________________________________________________________________________________
Sida 6/8
Now use the leveling tool that is included in the delivery of Infinity. Since the adapter bar
have splines inside it will not be possible to get the bubble of the spirit level exactly right.
Just choose the most correct position.
The leveling tool has two marks “H” and “L”. When the bubble of the spirit level is towards
the “H” the castors of the wheelchair will lift higher from the ground compared to if the
bubble of the spirit level is towards the “L”.
Adjustment of the angle can be done in two different manners. Both is descriped bellow.
Alt1.
Using the adjustment tool that
is included in the delivery of
Infinity (not this mounting set),
set the angle of the adaptorbar
so that the spirit level is in level.
Inside the pipes there are
splines so when rotating you
will feel and hear a clicking.
When desired angle have been
accomplished, check that the
center pipe is centered in the
wheelchair. Now tighten the
screws in the clamps (C).
WARNING!
The screws holding the clamps
(C) shall be tightened to 7-9Nm
of torque.
