Mounting set
INFM7X02
__________________________________________________________________________________
__________________________________________________________________________________
Sida 5/8
Now mount the complete
adapter bar that consists of
center pipe (A), outer pipe (B)
and clamp (C). The complete
adapter bar is mounted into
the adapter plates (D) by using
the QR-pins (E).
Make sure the ends of the
outer pipe (B) are parallell
otherwise it can be hard to
assemble it into the holders
(D). It shall be possible to
move the center pipe (A)
sideways and also rotate it if
correctly assembled.
First tighten the screws in the
19mm clamp (G), it shall be
possible to move the center
pipe sideways and also rotate
it even after tightening of the screws. Now tighten the screws
in the universal clamp (F).
Check that the arrow on the labeling mounted on the center pipe (A) is pointing towards the
front of the wheelchair. If the center pipe (A) is mounted the wrong way around it will not be
possible to attach Infinity to the bar.
