decon E-Drive PLUS Скачать руководство пользователя страница 83

Страница: 83 / 117

9.5. The Temperature of the Lithium Ion Battery

(ESB1) during Charging

Charge the battery in an environment with a tempera-

ture of 10 to 25°C.

• To protect the battery, if the internal temperature

of the battery is under 0°C or over 40°C, charging

does not start. Instead, it enters a standby mode.

During this time, the charge lamp (green) flashes.

While in standby mode, when the battery reaches an appropriate temperature, the charge lamp

(green) will change from a flashing to an “on” state, and charging will start automatically. (The

length of the standby time varies with the conditions.)

• The battery temperature increases during charging. However, if the battery temperature rises

above 45°C, the power for the charger will turn off to protect the battery.

Since charging has not ended, it is necessary to charge again after the battery temperature

has decreased.

Charging a battery immediately after travel, or charging a new battery is likely to cause its

temperature to increase, which increases the likelihood of the charger stopping charging

before completion.

Charge lamp

Содержание E-Drive PLUS






















































































































Результаты поиска

Содержание E-Drive PLUS

Отзывы:

Похожие инструкции для E-Drive PLUS

Бренды по названию

Популярные бренды

decon E-Drive PLUS, Руководство пользователя

Результаты поиска

Содержание E-Drive PLUS

Отзывы:

Похожие инструкции для E-Drive PLUS

Бренды по названию

Популярные бренды