decon E-Drive PLUS Скачать руководство пользователя страница 13

Страница: 13 / 117

WARNING

● Do not operate the clutch levers while the wheelchair is in motion. There is a

risk of collision or tipping over.

If you switch the clutch levers to the manual position while traveling in power

drive, the motor brake loses its effect and the wheelchair may go out of control.

If you switch the clutch levers to the power drive position while traveling in the

manual drive, brakes are applied to the rear tires. This abrupt braking can cause

your body to plunge forward or damage the wheelchair.

● Removing the battery while traveling causes

the brakes to be applied to the rear tires, and

may cause you or people around you to get

injured.

● Turning off the power switch while traveling

causes the brakes to be applied to the rear

tires, and you or people around you may get

injured.

● While the wheelchair is being operated or

after operation, do not touch the back of the

drive units. During or after operation, the back

of the drive units may be hot. In addition, if

the wheelchair is near a source of heat, the

drive units may become hot.

● While operating the wheelchair, be careful not

to get your hands tangled in the wheel spokes,

wheel holes, etc.

● The wheels of E-Drive PLUS 16" are not equipped with hand rims. When operat

ing E-Drive PLUS 16", do not manually drive the wheelchair by holding its rear

tires or wheels. You may injure yourself.

● When moving past hedgerows and trees, maintain a suitable distance to prevent

the rear wheels from coming into contact with twigs or other protruding items.

If twigs or other items from hedgerows and trees get caught in the rear wheels

when operating the wheelchair, it may result in the wheels becoming locked, the

clutch lever being knocked into the manual position, collisions or the wheel

chair tipping over.

● In areas with an incline, do not switch the clutch levers to the manual position.

The wheelchair may start moving unexpectedly, and may collide or tip over.

Содержание E-Drive PLUS






















































































































Результаты поиска

Содержание E-Drive PLUS

Отзывы:

Похожие инструкции для E-Drive PLUS

Бренды по названию

Популярные бренды

decon E-Drive PLUS, Руководство пользователя

Результаты поиска

Содержание E-Drive PLUS

Отзывы:

Похожие инструкции для E-Drive PLUS

Бренды по названию

Популярные бренды