manualshive.com logo in svg

DECKORATORS ALX CLASSIC, Техническое руководство

"DECKORATORS ALX CLASSIC" - это надежное и прочное декоративное решение для вашей площадки или террасы. Наши технические руководства помогут вам установить продукт без усилий. Бесплатно загружайте руководство по эксплуатации на {веб-сайте} и наслаждайтесь вашим улучшенным пространством.

Поделиться
Скачать
background image

INSTALLATION INSTRUCTIONS • SCENIC GLASS BALUSTERS

©2018 Universal Forest Products, Inc. Deckorators is a registered trademark of Universal Consumer Products, Inc. in the U.S. All rights reserved.  

933 US Route 202 Greene, ME 04236-3466  800.880.6278  8565_6/18

Deckorators.com

THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION OR USE 
OF THE PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH THE CONSTRUCTION 
OR USE OF THIS PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE PROJECT, INCLUDING, BUT NOT 
LIMITED TO, WEARING THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES NOT PROVIDE ANY OTHER WARRANTY, 
EITHER EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.

STAIR RAILING

Step 1: 

Attach top and bottom stair rails to posts according to 

local building codes. The distance from the front edge of the 
stair tread to the top of the rail is typically 36". Use a baluster  
as a guide to determine placement of the bottom rail. Find the 
center of the top and bottom rails and mark. Rail length ÷ 2 = 
center of rail.

Step 2: 

Attach the first baluster on-center of the center line 

using four of the screws provided. Drive each screw until the  
rubber grommet begins to mushroom. Do not over-tighten.

Step 3:

 Use a section of 2x4 to space the next baluster 

3-1/2" from the first. Attach the rest of the balusters  
using the 2x4 as a spacer block.

56    SCENIC GLASS BALUSTERS INSTALLATION INSTRUCTIONS

8565

Содержание ALX CLASSIC














































































Отзывы:

Нет отзывов

Похожие инструкции для ALX CLASSIC

Бренды по названию

Популярные бренды

Загрузить еще бренды