Deckma Hamburg OMD-2008, Инструкция по эксплуатации

Страница: 76 / 100

Page: 75 of 102
22.2.3 Functional Buttons AL1/ AL2/ SET
Pressing “AL1”, “AL2”, or “SET” button leads into the “SETTINGS, def” menu. At the SETTINGS, def.” menu the alarms,
time delays, the offset, the gain, and the output signal can be modified within the limitation. And the unit could be
also reset to factory default values there. Pressing the “SET” button in the “SETTINGS, def.” menu leads into the
particular values, where the limitation can be adjusted.
Select the required point by
using the “+” or “-“ button
and confirm with the “OK”
button.
Select the required point by
using the “+” or “-“ button
and confirm with the “OK”
button.
Select the required point by
using the “+” or “-“ button
and confirm with the “OK”
button.
Select the required point by
using the “+” or “-“ button
and confirm with the “OK”
button.