5
STEP 4
Assemble the pieces as shown below tight with ¼”x2 ¼” bolts.
Use a square to insure
the legs are parallel to each other and tighten. Width is not a concern.
STEP 5
The Base Plate may be tightened when assembled as shown below with 5/16” x 1 ¼”
bolts. The handles of the legs face the same side as the wheels.
Step 6
Assemble the Bottom and Top Brackets as shown below, position the trim lock by
tapping gently with a hammer.
Use ¼ x 1 ½ bolts and nuts with the spacers between
each bracket and tighten. TIP: You will have to cut the trim lock to install to your liking
for protecting your deck. Using a hair dryer or similar will help you with installing the
trim lock.
