background image

Overview

Front Panel:

1   Power indicator LED is lighted when Hot Stone is powered on.
2   5.5mm x 2.1mm DC output jacks
3   Adjustment controls for varying voltage of outputs 7 & 8.

Rear Panel:

4   Output Voltage Select Switches for outputs 5 & 6
5   AC Inlet - standard IEC connector.
6   AC Input Voltage Switch – set to proper voltage prior to plugging in the Hot Stone

FUSE REPLACEMENT

The Hot Stone Deluxe has a replaceable cartridge type fuse. Should your Hot Stone

Deluxe stop working, where there is no power being supplied to your pedals and 
the green power indicator on the Hot Stone front panel is not lit, it is recommended

to check the condition of the fuse. 

To access the fuse

, first be absolutely certain that the unit is detached from 

its AC power cable

. Then, remove the 2 flat head screws along the bases of the 

front and rear panels. Carefully remove the bottom  cover from the unit. The fuse 
is located at the AC power cable inlet connector. Please be sure to replace the fuse 

with the same type and rating: 5x20mm, 250V/500mA SLO BLO

1

2

3

4

5

6

Содержание Hot Stone Deluxe

Страница 1: ...es with 5 5x2 5mm blue barrel connector 1 DC cable with 3 5mm mini plug Manual and Warranty Declaration of Conformity Decibel Eleven declares that this product complies with the European Union Council Directives and Standards requirements for the Low Voltage Directive 2006 95 EC and the EMC Directive 2004 108 EC The European Union s EU WEEE Waste Electrical and Electronic Equipment directive is fo...

Страница 2: ... type fuse Should your Hot Stone Deluxe stop working where there is no power being supplied to your pedals and the green power indicator on the Hot Stone front panel is not lit it is recommended to check the condition of the fuse To access the fuse first be absolutely certain that the unit is detached from its AC power cable Then remove the 2 flat head screws along the bases of the front and rear ...

Страница 3: ...se down to about 5V fully counter clockwise This can be used to simulate a used carbon battery giving transistor fuzz pedals a unique brown sound The effect is not typically useful on effects which utilize opamps in the circuitry The voltage control is not intended to be a calibrated control The typical response when rotating the knob counter clockwise will begin as a very gradual voltage drop inc...

Страница 4: ...r 2 at 12V using the BLUE 5 5x2 5mm cable It is also possible to power them using a current doubling cable from outputs 5 and 6 set to 12V Strymon pedals can be powered from output 1 or 2 at 9V using the standard BLACK cable Other pedals will list power requirements in their manual or on the pedal itself Some manufacturers list actual power requirements while others may list only the rating of the...

Отзывы: