Decatur Electronics G3, Руководство пользователя и инструкция по установке, Страница: 14 / 76

G
3
™
U
se
r’s
&
In
sta
lla
tio
n M
an
ua
l
7/October/2020
14
2.2 Mounting and Connecting the Computer/Display Unit
WARNINGS
• Do not place the G3™ components in locations that will
obscure the driver’s view of the road .
• Double-check each component to ensure it is securely
mounted . In an accident, a loose component could
strike an occupant of the motor vehicle .
• Do not place the G3™ computer, antennas, cables, or
brackets in your motor vehicle’s air bag deployment
zones . Refer to your motor vehicle’s owner’s manual or
call the motor vehicle manufacturer if you are unsure
where the air bag deployment zones are .
You can mount the computer/display unit behind and to the side of
the steering wheel or on the dashboard . The computer unit easily
withstands and remains accurate in temperature extremes . Dash
mounting the unit promotes safety; you can read the display without
taking your eyes off the road .
To mount the unit, use the Velcro™ fastening material or the
mounting bracket . Before applying the Velcro™, use a clean cloth
to remove any foreign material from the dashboard and bracket
face . Position the Velcro™ lightly on the computer/display unit and
mounting surface .
After the unit is in the correct position, press it firmly to affix it to the
surface . For the bracket mount, simply place and tighten the screws
on the mounting bracket into the holes in the unit . Then adhere
the suction cups to a clean glass surface . For maximum adhesion,
moisten the suction cups before affixing them to the surface .
There are four locations where cables connect to the rear panel of the
computer unit . Two are quick-disconnect Ethernet connectors for the
antennas, a third is a nine pin DB-9 connector and the last is a quick
disconnect power connector .