5
5. Select your required mode by the “Mode button”, there are
three modes including “Normal”, “Soft” and “Pulse” for selection
(see below). And you can press the “Mode button” to make
switch between modes during operating.
A. Normal: For the normal cleaning of teeth.
B. Soft: For the sensitive teeth and the user who uses the water
flosser for the first time or only needs soft operation.
C. Pulse: For massaging gums to promote blood circulation and
strengthen the teeth.
NOTE:If you use this water flosser for the first time, please
choose the soft mode for a week, when you adapt to it, you can
use the other mode you like.other mode you like.
4.2 Remove the water tank and hold it vertically, then load it with
water, after it, replace the water tank well in position.
6. Hold the water flosser vertically and then insert the nozzle
into the mouth and aim at gums or teeth, at the same time,
slightly open your mouth to let the water flow out smoothly.
7. Turn on the switch to activate the water flosser. The
followings shall be paid attention to during operation.
A. The water shall flow out in a direction vertical to gums or
teeth.
